FAQ

You can get in touch with us via email - [email protected], we will respond ASAP upon receiving your inquiries.

The flex shaft grinder can be used on various materials such as wax, leather, jade, gemstone, wood, and stone.

The voltage rating of the grinder can be customized between the following ranges:
(1) 110-120V
(2) 220-240V

A Flex Shaft Grinder, also known as a rotary tool or a flexible shaft grinder, is a versatile handheld power tool used for various tasks in woodworking, metalworking, jewelry making, and crafting. It consists of a motor housing with a flexible shaft attached to it, which in turn connects to a hand piece or a variety of attachments.
Here are some common uses of a Flex Shaft Grinder:

1. Grinding and Polishing:
   The grinder can be fitted with various grinding stones, abrasive wheels, or polishing attachments to grind, shape, or polish materials such as metal, wood, plastic, and ceramics.
2. Engraving and Carving:
   With appropriate attachments, it can be used for intricate engraving and carving tasks on materials like wood, metal, glass, or stone.
3. Cutting:
   Some models of flex shaft grinders come with cutting wheels or attachments that allow for precise cutting of materials like metal, plastic, or wood.
4. Drilling:
   The tool can be equipped with drill bits of different sizes to drill holes in various materials.
5. De-burring and Cleaning:
   It's useful for removing burrs, sharp edges, or excess material from machined parts. Additionally, it can be used for cleaning rust or corrosion from metal surfaces.
6. Jewelry Making and Crafting:
   Flex shaft grinders are widely used by jewelers and crafters for tasks such as shaping, smoothing, and polishing jewelry components, as well as for intricate detailing work.

Overall, the flexibility and versatility of a flex shaft grinder make it a valuable tool for a wide range of applications, particularly those requiring precision and control in tight or hard-to-reach spaces.

A Flex Shaft Grinder differs from traditional rotary tools in several key aspects:

1. Flexibility and Accessibility: The primary difference is its flexible shaft. A Flex Shaft Grinder utilizes a flexible shaft that connects to an electric motor or power source, allowing the grinding or cutting attachment to be maneuvered into narrow or awkward spaces. In contrast, traditional rotary tools typically have a rigid shaft directly connected to the motor, limiting their ability to access tight areas.
2. Vibration and Control: Flex Shaft Grinders generally produce less vibration compared to traditional rotary tools. This is because the flexible shaft isolates the motor from the handpiece, reducing fatigue and enhancing control, especially during prolonged use.
3. Size and Weight: Traditional rotary tools are often compact and handheld, whereas a Flex Shaft Grinder may have a larger motor unit fixed in place, with the flexible shaft and handpiece used for detailed work. This design enhances comfort during extended use.
4. Precision and Detail Work: Due to their flexibility and reduced vibration, Flex Shaft Grinders are well-suited for precision tasks such as jewelry making, carving, and fine woodworking. They provide finer control over the tool, enabling intricate and complex work.
5. Power and Speed: While traditional rotary tools vary widely in power and speed capabilities, Flex Shaft Grinders typically maintain stable speed and torque during operation. This consistency is advantageous for tasks requiring precise control.

In summary, Coopro’s Flex Shaft Grinder offers enhanced precision, control, and accessibility compared to traditional rotary tools. It is particularly beneficial for detailed and complex tasks across various crafts and industries.

When using Coopro Flex Shaft Grinder, it's important to follow these safety precautions to ensure safe operation:

1. Wear Personal Protective Equipment (PPE): Always wear appropriate PPE, including safety glasses or goggles to protect your eyes from debris, and gloves to protect your hands from any potential hazards.
2. Secure Workpiece: Ensure the workpiece is securely held or clamped in place before starting the grinder. This prevents movement or unexpected shifting during operation.
3. Inspect Tool and Accessories: Before use, inspect the Flex Shaft Grinder, its attachments, and accessories for any damage or wear. Replace worn-out or damaged parts immediately.
4. Proper Ventilation: Work in a well-ventilated area or use local exhaust ventilation to remove dust and particles generated during grinding. Avoid inhaling dust or fumes.
5. Avoid Loose Clothing and Jewelry: Tie back long hair and avoid wearing loose clothing or jewelry that could get caught in the grinder or rotating parts.
6. Follow Manufacturer's Instructions: Adhere to the manufacturer's guidelines and operating instructions for the Flex Shaft Grinder. Ensure you understand how to safely start, operate, and stop the tool.
7. Keep Hands Clear: Keep hands and fingers away from the rotating parts of the grinder, especially the flexible shaft and grinding attachment, to prevent accidental contact.
8. Turn Off Power When Not in Use: Always turn off the grinder and disconnect it from the power source when not in use. This prevents accidental start-ups and ensures safety during maintenance or adjustments.
9. Training and Supervision: Ensure operators are properly trained in the safe use of the Flex Shaft Grinder. Supervise inexperienced users until they demonstrate competency in handling the tool safely.
10. Emergency Preparedness: Know the location of emergency stop buttons, first aid kits, and fire extinguishers in case of accidents or emergencies.

By following these safety precautions, users can minimize the risk of accidents and injuries when using a Flex Shaft Grinder for various tasks.

Using a damaged accessory on a Flex Shaft Grinder is not recommended. Here are several reasons why:

1. Safety Hazard: A damaged accessory can pose significant safety risks. It may not perform as intended, leading to unpredictable behavior such as breakage, flying debris, or loss of control during operation.
2. Reduced Effectiveness: A damaged accessory will likely not work efficiently or effectively. It may produce uneven results, increase vibration, or fail to achieve the desired outcome in grinding, cutting, or polishing tasks.
3. Potential Damage to Workpiece: Using a damaged accessory can damage the workpiece being worked on. It may leave scratches, gouges, or other imperfections due to improper functioning or irregular surface contact.
4. Further Damage to Grinder: Continuously using a damaged accessory can also potentially cause damage to the Flex Shaft Grinder itself. This may affect the performance and longevity of the grinder and

To maintain the flexible shaft of a Flex Shaft Grinder for efficient tool operation, follow these maintenance practices:

1. Regular Inspection: Inspect the flexible shaft before each use for any signs of wear, damage, or fraying. Pay attention to the connections and ensure they are secure and properly aligned.
2. Cleaning: Keep the flexible shaft clean and free from debris. Use a soft brush or cloth to remove dust and particles that may accumulate, especially around the connections and bearings.
3. Lubrication: Apply lubrication to the flexible shaft according to the manufacturer's recommendations. This helps reduce friction, maintain smooth operation, and extend the lifespan of the shaft.
4. Storage: Store the flexible shaft properly when not in use. Coil it loosely to avoid kinks or bends that could damage the shaft. Store it in a dry and clean environment to prevent corrosion.
5. Avoid Overloading: Operate the Flex Shaft Grinder within the recommended load limits specified by the manufacturer. Avoid excessive force or overloading the tool, which can strain the flexible shaft.
6. Replace Worn Parts: Regularly check and replace worn-out or damaged parts of the flexible shaft, such as bearings or seals, to maintain optimal performance and prevent further damage.
7. Professional Inspection: Periodically have the flexible shaft and the entire Flex Shaft Grinder inspected by a qualified technician or service provider. This ensures that all components are in good condition and operating safely.

By following these maintenance practices, you can ensure that the flexible shaft of your Flex Shaft Grinder operates efficiently and reliably over its lifespan.

The key components of a Flex Shaft Grinder include:

1. Motor Unit: This is the main power unit of the grinder, providing the necessary torque and speed for operation.
2. Flexible Shaft: It connects the motor unit to the handpiece and allows for flexibility and ease of maneuverability, enabling the handpiece to reach into tight spaces or around obstacles.
3. Handpiece: Mounted at the end of the flexible shaft, the handpiece houses the grinding or cutting attachment. It includes controls for power, speed, and sometimes additional features like tool locking mechanisms.

These components work together to provide flexibility, precise control, and the ability to perform detailed and intricate tasks in various crafts and industries.

• Jewelry Making: The focus on intricate detailing and polishing perfectly showcases the tool's ability for delicate work.
• Woodworking: Mentioning tight spaces and delicate areas reinforces the grinder's advantage in reaching those hard-to-get-to spots.
• Metalworking: Deburring, grinding, and polishing all benefit from the controlled handling and precision the flex shaft offers.
• Crafting and DIY: The emphasis on detailed work aligns with the grinder's ability for fine finishing touches in various projects.
• Model Making: Precise shaping and finishing are exactly where the controlled power of the flex shaft shines.

Adjusting the speed on Coopro Flex Shaft Grinder depends on the specific model you have. Here are the two most common methods:

1. Foot Pedal:

• This is the most common way to control speed on a Flex Shaft Grinder. The motor is housed in a separate unit, and a flexible shaft connects it to the handpiece where the grinding attachment is mounted.
• Pressing the foot pedal down gently increases the speed of the handpiece. Releasing the pedal slows it down and completely removing your foot stops the grinder entirely.
• Some foot pedals might offer a variable speed range, while others might be more on/off with varying degrees of pressure.

2. Dial Control (Stable speed)

• This method is less frequent but offers more precise speed control. A dial on the motor unit allows you to set a specific RPM (revolutions per minute).
• This can be beneficial for tasks requiring a consistent speed, especially for delicate work where too much pressure on the foot pedal might be detrimental.

In jewelry making, a Flex Shaft Grinder is a versatile tool that offers various options and attachments to facilitate different tasks. Here are some basic options and attachments commonly used with a Flex Shaft Grinder in jewelry making:

1. Grinding and Polishing Bits:

• Diamond Bits: Used for precise grinding and shaping of gemstones and metals.
• Rubber Polishing Wheels: Ideal for final polishing and buffing to achieve a high shine.

2. Burrs and Burs:

• Carbide Burrs: Used for shaping metal, especially useful for intricate designs and detailing.
• High-Speed Steel Burs: For general metalwork and shaping.

3. Sanding Drums and Bands:

• Abrasive Bands: Used for sanding and shaping metal and wood components of jewelry pieces.

4. Engraving and Detailing Attachments:

• Engraving Bits: Used for engraving designs and patterns on metal surfaces.
• Detailing Brushes: Used for cleaning and detailing intricate jewelry pieces.

5. Flexible Shaft Holder:

• Supports the Flex Shaft: Provides stability and control while working on delicate jewelry pieces.

6. Mandrels and Collets:

• Mandrels: Used for holding abrasive bands, polishing discs, and other attachments securely.
• Collets: Hold various sizes of drill bits, burrs, and other tools securely in the flex shaft.